Our customers from Malaysia (South-eastern asia) place the order on one(1*) pcs of machines:Model YX-GPC50-A carton sealing machine self-adjusting sealer.
For all the machines purchased it is clear to confirm all the information on the products so we often ask our customers to freight the samples to test and commission the machines in order that the machines and customer's products gains the best compatibility and adaptability.
After getting the confirmation &samples of the product in sizes and drawing for manufacturing the carton top sealing machines
we spent only 14 working days finishing everything and made the machines ready after testing them in a satisfactory feedback.
Recently our customers sent us the positive commentar on the machines which keep running very well in their factory ever since the machines arrived their factory.
The machines was shipped via DHL courier to Seberang Jaya, 13700 Prai, Penang, Malaysia. The documentaries certificated with ISO&CO&CE together with other files necessory are sent via DHL to customer for assisting customers to clear the custom.
As below there listed the basic information on the successful transaction between PENGLAI and their Malaysian counterpart:
Purchased order issued &Key communiction points During Business Discussion:
Samples sent from customers in South-eastern asia
Bank copy of Down&balance payment for purchasing carton tape sealing machine
Testing videos on model YX-GPC50-A carton sealing machine self-adjusting sealer:
Wooden case packing of carton sealing machine model YX-GPC50-A.
As follow there given the description on the machines purchased respectively
A case sealer or box sealer is a piece of equipment used for closing or sealing corrugated boxes. It is most commonly used for regular slotted containers (RSC) and can involve adhesive (cold water-borne or hot melt adhesive), box sealing tape, or Gummed (water activated) tape.
By contrast, a case erector is equipment for setting-up flat (knocked-down) corrugated boxes and applying a closure to the bottom flaps.
Technical Parameter of carton sealing machine with self-adjusting function:
Machine Parts
Model YX-GPI-50
Conveyor speed 25m/min
Carton sealing speed 300-360ctns/h
Carton size(mm)
Weight about 10 kg (contact lenses )
Adhesive tape width 48/60/75mm(choose one)
Power supply 220V 1 phase 50Hz
Power 420W
Air pressure 6kg/cm2(0.6Mpa) customized to 5kg/cm2
Air consumption 280NL/min
Direction From right to left
Table height 600-750mm
Machine weight 300KG
Machine dimension L1920×W1140×H1450mm
HS code 8422309090
Packing dimension(FYI) L2020xW1240x1600mm(4CBM);350KG
Configuration of carton sealer:
Configurations (FYI):
1.PLC: Mitsubishi
2.Motor: Taiwan,China GPG/VTV
3.Pneumatic Component: SMC
4.Button: Japan IDEC
5.Relay: Japan IDEC
6.AC Contactor: France SCHNEIDER
7.Power Switch: Taiwan,China MEAN WELL
8.Limit Switch: China SAFETYMAN
9.Sensor: Germany LEUZE
10.Bearing: China C&U/Taiwan,China YTP
11.Cutter: Japan SKD11
12.Conveyor Belts: Brand of Italy
13.Caster: YX-200
Malfunctions and solutions on carton erection bottom sealing equipment:
Malfunction and Solution of the Sealer
NrMalfunction Possible reason Solution
1 Adhesive tape can not be cut off
The reamer patch is not sharp enough.
The reamer tine isjammed by the bond.
Change the reamer patch
Launder the reamer patch
2 There is tail after the adhesive tape is cut off.
The reamer patch is not sharp enough.
There is stem on the reamer seating.
The pulling spring is too loose.
Check if the nut on the reamer
seating is too loose or not.
Lubricate the nut if necessary.
3 The adhesive tape can’t stick to the carton completely.
Main spring is too loose
and there is glue
on the axis of the roller.
The adhesive tape is disqualification
Adjust the pull of main spring
and clear up the roller.
Change the adhesive tape
4 The carton is locked in the midway.
The nut on the pasting wheel is too tight,
the height adjustment of the carton’s
transporting line is not suitable,
and the main spring is too tight.
Loosen the pasting wheel,
regulate the nut,re-adjust the height and loosen the main spring.
5 The adhesive tape is cut down during sealing.
The reamer patch protrudes excessively long.
Lower the place of the reamer patch.
6 The adhesive tape is often off the track.
The pressure of the guiding roller on the carton is not equal.
Re-adjust the space of the guiding roller.
7 The adhesive tape is not on the central line.
The anti-retrorse wheel is broken. Change the anti-retrorse.
8 There is abnormity during the sealing.
There is dust on the axletree seating.
Clean the axletree
seating and lubricate.
9 There is jut before sealing and drape after sealing.
The speed of different straps is different, and the carton is not at the proper place when pushing into the machine.
Adjust each transporting line’s pull to be consistent so that the carton can be put at the correct place.
10 There is drape after sealing
nameplate of carton sealer:
ALL RIGHTS RESERVED by ®Jiangsu Mixer Tank INDUSTRIAL CORPORATION LIMITED